Chemical Protective Boot Covers

Our chemical protective boot covers meet EN 13034 Type 6 standards, providing reliable foot and lower leg protection against liquid chemical splashes, particulates and contamination. Made from a 65gsm microporous laminate fabric with an effective barrier against liquids and particles. The boot cover extends from the foot to below the knee, providing full coverage of the shoe and lower leg. All seams are tape-sealed to prevent penetration through stitch holes. An anti-slip PVC sole provides traction on wet and slippery surfaces. An elasticated top opening ensures a snug, secure fit around the calf. A side zip allows easy donning over work boots. The boot covers are designed to be worn over existing work boots or safety shoes. Suitable for chemical handling, decontamination, asbestos removal, pharmaceutical manufacturing, food processing and cleanroom environments.
SPECS
Material:microporous laminate 65gsm
Standards:EN13034 Type6
Length:foot to below knee
Seams:tape-sealed
Sole:anti-slip PVC
Top opening:elasticated calf
Closure:side zip
Care:single-use disposable
Sizes:S-5XL
Colors:white, blue
Weight:90g per pair
DETAILS
Our chemical protective boot covers are certified to EN 13034 Type 6 for protection against light liquid splashes and reduced spray, providing reliable foot and lower leg barrier protection for workers in chemical handling, decontamination, asbestos removal, pharmaceutical manufacturing and controlled industrial environments. The boot covers are constructed from a 65gsm microporous laminate fabric, in which a thin microporous film is bonded to a polypropylene non-woven substrate. The film layer blocks liquid droplets, chemical splashes and particulate matter while allowing moisture vapour to pass through, reducing heat and moisture buildup inside the boot cover during extended wear. Each boot cover is cut in a tall, generous shape that extends from the foot up to below the knee, providing complete coverage of the entire work boot or safety shoe and the lower leg areas commonly exposed to splashes, spills and contamination from the ground or from overhead dripping. All seams are tape-sealed with chemesistant sealing tape, preventing liquid and particulate penetration through stitch holes and ensuring continuous barrier integrity. The sole of the boot cover is made from a durable, anti-slip PVC material that provides reliable traction on wet, slippery and contaminated surfaces, reducing the risk of slips and falls. The PVC sole is bonded to the fabric upper with a continuous sealed weld, eliminating the seam between sole and upper as a potential penetration point. An elasticated gather at the top opening (calf level) ensures a snug, secure fit around the wearer's calf, preventing the boot cover from slipping down and stopping liquids and particulates from entering at the top. A heavy-duty side zipper running from the ankle to the calf allows easy, quick donning over existing work boots or safety shoes without the need to remove footwear, saving time and improving convenience in decontamination zones and changing areas. The boot covers are designed to be worn over existing work boots or safety shoes; they are not intended as standalone footwear. The generous cut accommodates most standard work boot styles and sizes. The material is antistatically treated and latex-free. Available in white and blue, sizes S-5XL corresponding to shoe sizes 36 through 47 (EU). Sold as a pair. This is a single-use disposable product; after use it should be removed following proper doffing procedures and disposed of according to applicable waste regulations. Ideal for chemical handling and transfer, decontamination and wash-down operations, asbestos and lead abatement, pharmaceutical and biotech manufacturing, food processing and packaging, cleanroom and controlled environment entry, mould remediation, pest control, and as a component of a complete chemical protective clothing system where foot and lower leg protection is required.
