top of page

Chemical Protective Hood

Our chemical protective hood provides reliable head, neck and shoulder protection against liquid chemical splashes, aerosols and particulates. Made from a 60gsm microporous laminate fabric with an effective barrier against liquids and particles while remaining breathable. The hood features a full-face opening with elasticated edge that seals around a respirator or face shield, and a shoulder cape that drapes over the upper chest and back for extended coverage. All seams are tape-sealed to prevent penetration through stitch holes. Fits S-5XL, with an adjustable neck drawcord. The hood is designed to be worn in combination with a half-mask or full-face respirator, safety goggles or face shield, and a hard hat if required. Suitable for chemical handling, spray painting, asbestos removal, decontamination and pharmaceutical manufacturing.

SPECS

Material:microporous laminate 60gsm
Standards:EN13034 Type6 compatible
Design:hood + shoulder cape
Face opening:elasticated seal
Seams:tape-sealed
Fit:S-5XL
Care:single-use disposable
Colors:white, blue
Weight:60g

DETAILS

Our chemical protective hood is designed to provide reliable head, neck and upper shoulder protection against liquid chemical splashes, aerosols and airborne particulates, and is intended to be worn as a component of a complete personal protective equipment system in hazardous industrial environments. The hood is constructed from a 60gsm microporous laminate fabric, in which a thin microporous film is bonded to a polypropylene non-woven substrate. The film layer blocks liquid droplets, chemical splashes and particulate matter while allowing moisture vapour from perspiration to pass through, keeping the wearer cooler and more comfortable than impermeable film alternatives during extended tasks. The hood features a full-face opening with a wide elasticated edge that is designed to seal snugly around the perimeter of a half-mask or full-face respirator, face shield or safety goggles, creating a continuous protective interface between the hood and respiratory/eye protection that prevents splashes and particulates from entering at this critical junction. Attached to the base of the hood is a shoulder cape that drapes down over the upper chest, shoulders and upper back, providing extended coverage beyond the head and neck area and overlapping with the wearer's protective coverall or jacket to eliminate gaps at the neckline. All seams are tape-sealed with chemical-resistant sealing tape, preventing liquid and particulate penetration through stitch holes. The hood is S-5XL, with an adjustable drawcord at the neck base allowing the wearer to achieve a snug, secure fit. The hood is designed to be worn in combination with respiratory protection (half-mask or full-face respirator), eye protection (safety goggles or face shield), and a safety helmet or hard hat if required by the task. The generous cut accommodates all of this equipment comfortably. The material is antistatically treated and latex-free. Available in white and blue. This is a single-use disposable garment; after use it should be removed following proper doffing procedures and disposed of according to applicable waste regulations. Ideal for chemical handling and transfer, spray painting and coating application, asbestos and lead abatement, decontamination and wash-down operations, pharmaceutical and biotech manufacturing, mould remediation, pesticide application, and any task requiring head, neck and shoulder protection as part of a complete chemical protective clothing system.

bottom of page