Chemical Splash Gown

Our chemical splash gown meets EN 13034 Type 6 standards, providing front and sleeve protection against light chemical splashes, particulates and biological contamination. Made from a 55gsm microporous laminate fabric, it offers an effective barrier while remaining breathable. The open-back design with tie closures at the neck and waist allows rapid donning and doffing, making it ideal for decontamination zones and visitor areas. Long sleeves with elasticated cuffs provide wrist coverage and can be worn under gloves. A front pocket offers convenient storage for pens and small items. Overlocked seams provide adequate strength for single-use applications. The gown is lightweight and comfortable for short-to-medium duration tasks. Suitable for laboratories, decontamination areas, pharmaceutical production, food processing and light chemical handling.
SPECS
Material:microporous laminate 55gsm
Standards:EN13034 Type6
Design:open-back tie closure
Sleeves:long elasticated cuffs
Seams:overlocked
Pockets:single front patch pocket
Care:single-use disposable
Sizes:S-5XL
Colors:white, blue, yellow
Weight:160g
DETAILS
Our chemical splash gown is certified to EN 13034 Type 6 for protection against light liquid splashes and reduced spray, providing reliable front and sleeve barrier protection for workers in laboratories, decontamination areas, pharmaceutical production and light chemical handling environments. The gown is constructed from a 55gsm microporous laminate fabric, in which a thin microporous film is bonded to a polypropylene non-woven substrate. The film layer blocks liquid droplets, particulates and biological contaminants while allowing moisture vapour from perspiration to pass through, keeping the wearer cooler and more comfortable than impermeable film alternatives during tasks of moderate duration. The gown features an open-back design with tie closures at the neck and waist, a key functional feature that allows extremely rapid donning and doffing essential in decontamination zones, emergency response situations and visitor entry areas where workers need to put on and remove protective clothing quicd frequently. The open back also improves ventilation and reduces heat stress, making the gown well suited for warm environments and short-to-medium duration tasks. Long sleeves with elasticated cuffs provide full wrist coverage and are designed to be worn underneath chemical-resistant gloves, creating a continuous protective barrier from shoulder to hand. A single front patch pocket provides convenient storage for pens, markers and small notebooks. Seams are overlocked (serged) for adequate strength and garment integrity in single-use applications. The gown is lightweight, low-bulk and comfortable, with a generous cut that allows it to be worn over regular clothing or base workwear. The material is antistatically treated and latex-free. Available in white, blue and yellow, in S-5XL options. This is a single-use disposable garment; after use it should be removed following proper doffing procedures to avoid self-contamination and disposed of according to applicable waste regulations. Ideal for laboratory and research environments, decontamination and wash-down areas, pharmaceutical and biotech production, food processing and packaging, light chemical handling and mixing, healthcare and clinical settings, asbestos inspection, pest control, and as a visitor or contractor garment in controlled industrial and laboratory environments.
