top of page

Fully Encapsulating Chemical Suit

Our fully encapsulating chemical suit meets EN 943-1 Type 1a (ET) standards, providing the highest level of protection against gaseous, liquid and solid hazardous chemicals. Constructed from a multi-layer butyl rubber and polymer composite fabric with exceptional resistance to a wide range of toxic chemicals, warfare agents and industrial gases. The suit is fully sealed with integrated butyl rubber gloves and chemical-resistant boots, eliminating all interface penetration points. A wide-view polycarbonate face visor provides excellent visibility while maintaining gas-tight integrity. The suit is designed for use with a self-contained breathing apparatus (SCBA) worn inside the suit. An internal air circulation system and pressure relief valve maintain positive pressure. Suitable for hazardous material emergency response, chemical spill cleanup, toxic gas environments and industrial first-response teams.

SPECS

Material:multi-layer butyl rubber polymer composite
Standards:EN943-1 Type1a (ET) gas-tight
Gloves:integrated butyl rubber
Boots:integrated chemical-resistant
Visor:wide-view polycarbonate
Breathing:SCBA compatible (inside suit)
System:positive pressure + relief valve
Care:reusable, decontaminate & inspect
Sizes:S-5XL
Colors:orange, yellow
Weight:4800g

DETAILS

Our fully encapsulating chemical suit is certified to EN 943-1 Type 1a (ET encapsulating, gas-tight) and represents the highest level of personal protective equipment available for workers facing extreme chemical hazards. The suit is constructed from a multi-layer composite fabric combining butyl rubber with specialised polymer barrier films, providing exceptional resistance to permeation by a very broad range of toxic industrial chemicals, chemical warfare agents, organic solvents, acids, bases and gases. The multi-layer construction is engineered so that each layer targets different classes of chemicals, creating a cumulative barrier that far exceeds the performance of any single material. The suit is fully encapsulating and gas-tight: every opening is permanently sealed, with integrated butyl rubber gloves chemically bonded to the sleeve ends and integrated chemical-resistant boots bonded to the leg ends, eliminating all interface points where chemicals could otherwise penetrate. A wide-view curvycarbonate face visor provides an excellent field of vision with minimal distortion while maintaining full gas-tight integrity; the visor is optically clear and resistant to scratching and chemical attack. The suit is designed to be worn with a self-contained breathing apparatus (SCBA) carried inside the suit, ensuring that the wearer breathes clean, filtered air completely isolated from the external atmosphere. An internal air circulation system distributes exhaled air throughout the suit to prevent visor fogging and improve thermal comfort, while a pressure relief valve maintains a constant positive internal pressure ensuring that if any leak were to occur, air would flow out of the suit rather than allowing contaminated external air to enter. The suit features a heavy-duty gas-tight entry zipper, typically located at the back or side, which is sealed after donning. Reinforced panels at the knees, elbows and seat increase abrasion resistance. The suit is designed for repeated use: after each deploit must be thoroughly decontaminated using appropriate procedures, pressure-tested to verify gas-tight integrity, and inspected before return to service. Available in high-visibility orange and yellow, sizes S-5XL. This is specialised, highest-level PPE intended for use by trained and certified hazardous material response personnel only. Ideal for HAZMAT emergency response teams, chemical spill cleanup and containment, toxic gas and vapour environments, industrial first-response teams, chemical plant emergency operations, and remediation of unknown or highly toxic chemical releases.

bottom of page