top of page

Lightweight Chemical Splash Coverall

Our lightweight chemical splash coverall meets EN 14605 Type 4 and EN 13982 Type 5 standards, providing reliable protection against liquid chemical splashes, aerosols and dry particulates. Made from a 60gsm microporous laminate film bonded to a non-woven polypropylene substrate, the material offers an excellent barrier while remaining breathable to reduce heat stress. All seams are ultrasonically welded and tape-sealed to eliminate stitch holes as potential penetration points. A front zip closure protected by a storm flap with adhesive strip ensures a secure seal. Elasticated hood, wrists, waist and ankles create a snug fit that prevents chemicals from entering. The attached hood fits under a respirator or face shield. Suitable for chemical handling, industrial cleaning, paint spraying, asbestos removal and agricultural chemical application.

SPECS

Material:microporous laminate 60gsm
Standards:EN14605 Type4, EN13982 Type5, EN13034 Type6
Seams:ultrasonically welded + tape sealed
Closure:front zip + adhesive storm flap
Fit:elasticated hood wrists waist ankles
Hood:attached integrated
Care:single-use disposable
Sizes:S-5XL
Colors:white, blue
Weight:280g

DETAILS

Our lightweight chemical splash coverall is certified to EN 14605 Type 4 for liquid spray protection and EN 13982 Type 5 for dry particulate protection, delivering reliable barrier performance for workers handling liquid chemicals, aerosols and fine dust in industrial environments. The garment is constructed from a 60gsm microporous laminate film bonded to a spunbond polypropylene non-woven substrate. The microporous film layer contains billions of microscopic pores that are small enough to block liquid droplets, chemical splashes and particulate matter while allowing water vapour from perspiration to pass through, significantly reducing heat buildup and improving wearer comfort during extended tasks. All seams are ultrasonically welded and then covered with a continuous chemical-resistant tape seal, eliminating needle holes that would otherwise create penetration pathways for liquids and particles. A heavy-duty front zipper is protected by an overlapping storm flap fitted with a pressure-sensitive adhesive strip, allowing the wearer to create a complete seal along the closure after donning. The coverall features elasticated gathers at the hood opening, wrists, waist and ankles, ensuring a snug, secure fit that prevents chemicals and particulates from entering at these critical interface points. The attached three-panel hood is designed to be worn underneath a respirator, face shield or safety helmet, providing continuous neck and head coverage without interfering with respiratory equipment. A generous cut allows the coverall to be worn over base clothing and lightweight workwear. The material is antistatically treated to prevent static buildup in sensitive environments. Available in white and blue, sizes S-5XL. This is a single-use disposable garment intended for one shift or one task, after which it should be safely disposed of according to local hazardous waste regulations. Ideal for chemical handling and transfer, industrial cleaning and decontamination, paint and coating application, asbestos and lead abatement, mould remediation, agricultural pesticide application, pharmaceutical manufacturing and laboratory work requiring protection against liquid splashes and airborne particulates.

bottom of page